It supports up to Triple Head with up to 350 degC for high temperature printing.
Its CreatBot DX • CreatBot DX Plus 3D Printer (https://top3dshop.com/product/creatbot-dx-and-dx-plus-3d-printers) is fast printer equipped with 300*250*300mm (DX) 300mm x 250mm 520mm(DX Plus) build volume and 0.04mm resolution for printing. The walls that can be seen through allow you to watch as the printer produces the 3D model you want to print. It’s the CreatBot DX series comes with height-adjustable nozzles that allow users to manually align the nozzles efficiently and quickly. This will ensure that your print quality is of the highest standard due to the an ideal coordination among the various nozzles. This sturdy 3D Printer has up to three print heads, a semi-enclosed chamber that has transparent walls as well as a heated glass printing bed, as well as an Bowden model extruder. The extruder is equipped with stepper motors situated in the rear of the machine , resulting in an extremely light-weight print head assembly that allows high-speed 3D printing.
All chassis made of metal
A 3D printer needs a certain amount of weight in order to guarantee the stability of operation. This is why a aluminum chassis can be considered the most ideal choice with regards to 3D printing.
All built-in construction space that is enclosed
The CreatBot it is a completely enclosed space for building that stops big prints from becoming broken or damaged. In the box
Smart adjustable extruder
CreatBot extruders feature an advanced cooling system that guarantees your filament stays fed at a constant temperature throughout the day. The nozzles with adjustable heights let you to align two nozzles quickly and easily. It is ideal for printing when you wish to print using support, different materials, or two colors. All CreatBots are made by 3D Prima comes with dual extruders that are standard.
High-temperature prints
The nozzles operate at temperatures of up to 400 ° Celsius. This means that you are able to make use of a range of filaments. Additionally, it provides an extremely stable temperature while printing.
Large build volume
DX DX | DX+ boasts an amazing build volume of 300 250 x 300mm(DX)/520mm(DX Plus) This is plenty for the majority of makers. This means you can print your designs in 52cm height with resolution of 0.04 millimeters.
Ceramic hot bed panel
On top of the silica heating plate , there’s an amazing ceramic hot bed. It is more costly than glass, yet it provides more efficient heating distribution and more uniform heat. The ceramic hot bed is extremely smooth and has a strong adhesion.
Hot bed tray in metal
A fully-metal hot bed tray is a solid print surface that enhances stability.
Automatically shut down
Your CreatBot comes with the power management module. Once the print is completed and no action is done within five minutes, the printer will stop. It is extremely useful and efficient in terms of energy consumption.
Multi-function key pad
CreatBot comes with a multi-function keyboard. This allows for easy control and access to the majority of utilized functions, including the Z shaft’s up and down, heating/cooling the hot bed as well as pause, resume print and browse the SD card and many more.
Gear motors feeder
A gear motor is able to produce greater torque than a general stepper motor. This assures an even flow of filament throughout the entire time and that the retraction process is flawless.
Filament detection system
If you run out of filament in printing, don’t fret. The printer will switch into mode of pause and allow you to change the filament . Then you can resume the print, effortless!
Continued print
In the event of an unexpected power outage, the printer will remember the last position it was in and stores it. It then reduces the filament and retracts it. If the power is restored on, you are able to print.
Printing Samples
Technical Specifications
Technical characteristic Values
Name of the product Creatbot DX | DX Plus
Size of the build (LDH) 300*250*300mm DX|300*250*520mm DX Plus
Nozzle diameter 0.4, 0.5, 0.8, 1.0mm
Minimum thickness 0.04 mm
Accurate positioning XYZ Axis 0.01 millimeters Z 0.015 millimeters
Max Speed of Printing 180 mm/s
Max Speed of Travel 250 mm/s
Nozzle temperature Max. 350 degrees (250 degreees option.)
Temperature of the hot bed Max. 120 Degree
Materials for filtering PLA / ABS / PVA / Nylon / HIPS /FLEX/PETG etc
Filament diameter 3.0 mm (1.75 mm optional)
OS platform Windows, Linux, Mac OS, OSX
Language English, Multi-language
Software CreatBot multi-language version
Slicer Cura, Slic3r Print
Software Cura, Printrun, RepetierHost
Format for files STL, OBJ, GCode, Amf
Control chip Arduino ATmega2560 R3Micro Controller
LCD Size 128*64 monochrome multi-language
Power supply 110~220V 360W
Stepper Motor X, Y 42*48, 1.3A Z 42*42, Ratio 1:10
Power Input 110 -220V, 1.5 A
Power Output 24V, 10.5A
Machine dimensions weight 420*380*570mm 28Kg DX | 420*380*790mm 35Kg DX Plus
Packaging dimensions weight 560*520*710mm 42Kg DX | 560*520*930mm 55Kg DX Plus
