Intamsys FunMat HT Enhanced High Temp 3D Printer

PEEK 3D PRINTING WITH INTAMSYS FUNMAT HT 3D PRINTER

The Funmat is equipped with an sophisticated thermal system design that includes a 90degC constant-temperature chamber, a 160degC heated build plate and an 450degC hot-temperature extruder, with an all-metal hotend which is specifically created to print PEEK as well as many other functional materials that are high-performance. The high-temperature nozzle makes it possible users to print at a broad temperature range using the available hot ends. Print using low temperature materials like ABS Nylon, ABS, PLA as well as high temperature materials such as PEEK, PEI and PPSU and many more. It’s all possible thanks to an open system of materials with a temperature limit of 450°C. It’s been utilized for every possible application in the Aerospace automotive, Medical Engineering, Research, as well as the Oil/Gas industries.

Read the full review on the Top3dshop blog https://top3dshop.com/blog/intamsys-funmat-ht-enhanced-review.

FUNMAT HT ENHANCED FEATURE AUTO-BED-LEVELING FOR QUICK AND EASY CALIBRATION

In the case of the FunMat Enhanced 3D printer Intamsys has made high-temperature 3D printing even more affordable by introducing the automatic bed leveling feature that is available on this FunMat. That means that, with each print made, you FunMat HT Enhanced 3D printer will be adjusted to the exact print surface, and any adjustments to the print bed during time will be recorded. This will result in a better adhesion of the first layer which is the most crucial layer for be successful in 3D printing.

Materials that are high temperature like PEKK, PEEK and PEI can be expensive and that’s why you should make to print as few times as feasible. The auto-bed-leveling function that comes with the FunMat HP enhanced 3D printer will to ensure that each time you click “Print” you will be a success.

NEW CERAMIC BUILD PLATE ENSURES MORE EFFICIENT AND MORE EFFECTING HEATING

Intamsys considered all aspects of FunMat HT when designing the Enhanced edition and nowhere is this more apparent than on the brand new build plate. The upgrade from borosilicate glasses to a glass-ceramic-composite, and also using PI film and PI film, the FunMat HT enhanced 3D printer build plate has a higher degree of flexibility with less thermal distortion as well as for the build plate as well as for the prints you print. With consistent heating throughout every single layers, prints from any type of material will are much more likely to succeed in being firmly adhered from start to end. This results in less iterations and greater success.

IMPROVED HOTEND DESIGN WITH ALL-METAL NOZZLE FOR LESS DOWNTIME AT HIGH TEMPS

Intamsys created a stunning hotend for their initial FunMat HT, but they obtained feedback from customers and made improvements to the design for the enhanced FunMat HT. The new Hotend is a more efficient design that allows for the highest temperatures required for engineering 3D printing filament. However, it’s less likely to get blocked when printing, which could cost you production time.

Its Hotend is also much more easily exchangeable than it was before, meaning you can swap it out and install it more quickly because of the modular layout.

UPGRADED ENCLOSURE KEEPS HEAT IN AND SAVES ON ENERGY

The core of the FunMatHT is its heated building chamber making sure that each printed layer stays in place in the 90C temperature. Additionally, the Intamsys Enhanced FunMat HT has an improved insulation system to ensure that the heat remains exactly where it should be, and engulfs your printed image. The cool air inside the printer remains in the same place and there’s less strain on the heaters and the printer is cool and comfortable to the feel.

The lower power usage and the greater security is the reason this 3D printer with high temperatures is truly enhanced.

TECHNICAL SPECIFICATIONS

• Printing Technology: Fused Filament Fabrication (FFF)
• Build Volume: 260mm x 260mm x 260mm (10.24″ x 10.24″ x 10.24″)
• Building Platform: Glass Ceramic Composite the PI Film placed on an aluminum Plate
• Layer Thickness: 0.05 – 0.3mm
• Filament Diameter: 1.75mm
• Print Speed: 30-300mm/s
• Extruder Temp. – Standard Hotend: Up to 300degC
• Extruder Temp. – High Temperature Hotend: 450degC (842degF)
• Platform Temp. : 160degC (320degF)
• Chamber Temp. : 90degC (194degF)
• Supported Materials: PEEK, PEI, PEKK, PPSU, PA/CF, PC, PC Alloys, PA, ABS, Carbon Fiber-Filled, Metal-Filled, Fiberglass-Filled, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA, etc.
• Position Accuracy: 12.5um in X and Y, 1.25um in Z
• Input File Type: STL, OBJ
• Connectivity: Ethernet, WiFi, SD Card
• Power Consumption: 1200W, 110V, 10A
• Safety Certs: FCC and CE

WHAT’S IN THE BOX?

• Printer (with normal hot end)
• Ceramic Glass Build Plate x 2
• Hot end of high temperature
• SD Card
• USB SD Card Reader
• USB Cable
• Power Cable
• Packing List
• Quick Start Guide
• Metal sheet for leveling
• 7 mm Socket driver
• Scraper
• Gloves
• Hex Wrench Set
• Tweezers
• Wire Cutters
• 1.0 Kg Spool of Black ABS
• Replacement Feeder
• 0.4 mm Brass Nozzle
• 0.6 mm Brass Nozzle
• 0.4 mm Steel Nozzle
• Extruder Gear
• Zip Ties