The Raise3D E2 is an educational 3D printer that enables 3D printing in a dual independent extrusion. The Raise3D E2 is versatile and robust and can print prototypes with high precision. Intended for the educational sector (schools, colleges, high schools, universities, factories), the Raise3D E2 (https://top3dshop.com/product/raise3d-e2-3d-printer) is safe and reliable thanks to its automatic pause system and its completely closed structure. Thanks to its large printing volume (330 x 240 x 240 mm), you can print large and high-quality parts.
THE STRENGTHS
- IDEX technology (Independent Dual Extruders) – Multiple prints simultaneously
- Large print volume (up to 330x240x240 mm)
- Filament end detector
- Print recovery in case of power failure
- Flexible magnetic plate
- Ergonomic 7 inch touch screen
- Automatic bed leveling
- Industry’s first video-based offset calibration system
- NXP ARM Cortex-A9 Quad 1GHz
- Compatible with a wide range of filaments up to 300℃
- HEPA air filtration
The Raise3D E2 printer is equipped with two independent extruders that allow you to improve your productivity thanks to the two printing modes:
Duplication: this mode allows you to double your efficiency by printing the same part twice at the same time.
Mirror: Ideal for the footwear industry, print your 3D model and its symmetrical copy simultaneously to reduce design time.
In addition, the print head automatically performs offset calibration to reduce the risk of printing error.
Safe to use when teaching
The Raise3D E2 is fully enclosed to ensure and maintain an appropriate temperature for printing 3D parts. It has 2 doors: one on the top of the printer and one on the front. These allow you to have different views of the 3D printing. The sensors on the doors cause an automatic pause when the doors are opened.
A wide range of materials
Thanks to its adhesive hot plate and its maximum extrusion temperature of up to 300 °C, the Raise3D E2 is able to print a wide range of filaments with a diameter of 1.75 mm.
Compatible materials: HIPS / ABS / PLA / PC / TPU / TPE / NYLON / PETG / ASA / PP / PVA / Fiberglass / Carbon Fiber / Metal / Wood / Non-proprietary filaments.
A simplified user interface on the Raise3D E2
An ergonomic touch screen
The easy-to-use 7-inch color touchscreen allows you to start printing, change rolls, and watch explanatory videos on the different printing methods. In addition, the power-saving mode allows you to turn off the screen while printing to save energy.
An enhanced manufacturing platform
The Raise3D E2 printer features a magnetic fabrication tray that is easily removable and flexible to facilitate the removal of 3D parts. The silicone surface reduces potential deformation when printing in 3D. In addition, automatic offset calibration is integrated, supported by a video on the touch screen. This calibration prevents the risk of failure on the first layer.
An integrated filter system
On the back of the Raise3D E2 is a filter system to filter the air and particles released during printing. This low-noise filter absorbs 91% of the particles produced during extrusion.
Remote management
RaiseCloud, an intelligent platform
Developed by Raise3D, RaiseCloud is an ecosystem for managing the printing process. You can monitor and manage your team’s impressions. Also, check the workflow and change the settings remotely. Moreover, you can combine it with RaiseFactory to run multiple prints simultaneously.
Optimized software
Set up your 3D prints with IdeaMaker and its predefined configurations. With its many options, you can configure specific settings for a printer, filament or model yourself and reuse them later. Monitor your print from your computer with the built-in camera to make sure your print is running smoothly. You can also connect to the printer via Wi-Fi and send your files directly to it in Gcode.
A filament end detector
The Raise3D E2 printer is equipped with a fine filament sensor to prevent printing errors due to lack of filament. Printing stops when the sensor detects no more filaments. The printer stores the position of the print head so that it can be resumed at the same position.
Connectivity
You can connect your computer to the printer via a Wi-Fi connection for wireless management, or choose a local connection via USB stick or Ethernet cable.
General Information
Brand name Raise3D
Printing technology FDM
Print volume 330 x 240 x 240 mm
Type 3D printer
Noise level 50 dB
Physical dimensions
External dimensions 607 x 596 x 465 mm
Equipment
Number of extruders 2
Heating plate Yes
Nozzle diameter 0.2 mm, 0.4 mm, 0.6mm, 0.8mm, 1.0 mm
Connectivity WiFi, Ethernet, USB port
Operating system Windows / Mac OS / Linux
