Industrial 3D printer for short run production.
the updates at a glance:
- Electronically driven lifting system.
- Improved extruder head with increased torque output and dual gear drive.
- Filament RUN-OUT sensor (optical)
- High temperature silicone heating bed. Magnetic aluminum bed. Improved 4 + 9 point lock system.
- Air filter (Environmentally friendly and health protecting).
OTHER UPDATES
- improved factory calibration
- built-in camera
- improved nozzle
- improved Hotend insulation
- software controllable active cooling fan
- high quality optical end stops
- installation space: 305x305x605 mm
The Raise3D Pro2 Plus impresses with many highlights that can hardly be found in combination on the market. Its completely enclosed design and the 7 inch touch display with integrated controller clearly set the system apart from the competition. Of course, the Raise3D Pro2 Plus has an open platform. So you can use various filaments in 1.75mm. The heatable build plate (up to 110 degrees), the completely closed build space and the extruder that can be heated up to 300 degrees open up many possibilities for you here.
ADVANCED IMPROVED TWIN EXTRUDER
- Electronically driven lifting system.
- Improved extruder head with increased torque capacity and dual gear drive.
- Filament RUN-OUT sensor (optical)
Thanks to the dual extruder, multi-color objects can be created. Furthermore, the second extruder can of course also be used for water-soluble support material (PVA / HIPS). Thus, oh complex geometries can be printed with this system.
RENEWED HEATING BED
High temperature silicone heating bed. Magnetic aluminum bed. Improved 4 + 9 points lock system.
Air Filter (Environmentally friendly and health protecting)
What even we did not know is the RESUME function. This allows a continuation of active print jobs even after a power failure. An integrated 1000mA battery allows to save the print progress and thus the printing process can be easily resumed.
Of course, print speed and print quality are also on a very high level. Especially the possible resolution in the Z-direction is amazing. 0.01mm minimum layer height is possible in the best case. This means that very fine structures and unusually smooth surfaces can be produced. However, only very small objects should be printed at this resolution. The printing time increases dramatically when using such high resolutions.
OTHER UPDATES
- improved factory calibration
- built-in camera
- improved nozzle
- improved Hotend isolation
- software controllable active cooling fan
- high quality optical end stops
Technical data:
- Printing technology: FFF
- Build volume (W×D×H):
– Single extrusion print: 12×12×23.8 inches / 305×305×605 mm
– Dual extrusion printing: 11×12×23.8 in / 280×305×605 mm - Machine size (W×D×H): 24.4×23.2×43.5 inches / 620×590×1105 mm
- Print head: dual head with electronic lifting system
- Filament diameter: 1.75mm
- XY step size: 0.78125 micron
- Z step size: 0,078125 micron
- Print head travel speed: 30 – 150 mm/s
- Building plate: Heated aluminum building plate with magnetic holder
- Maximum temperature of the plate: 110 ºC
- Heated bed material: Silicone
- Build plate leveling: Pre-calibrated leveling
- Supported materials: PLA / ABS / HIPS / PC / TPU / TPE / NYLON / PETG / ASA / PP / PVA / glass fiber filled / carbon fiber reinforced / metal
- particle filled / wood filled.
- Nozzle diameter: 0.2/ 0.4/ 0.6/ 0.8/ 1.0 mm
- Maximum nozzle temperature: 300 ºC
- Connectivity: Wi-Fi, LAN, USB port, live camera
- Noise emission (sound): ＜50dB(A) during printing.
- Operating ambient temperature: 15-30ºC, 10-90% RH non-condensing
- Storage temperature: -25ºC to +55ºC, 10-90% RH non-condensing
Electrical
Power supply input: 100-240V AC, 50/60Hz 230V @3.3A
Power supply output: 24V DC, 600 W, 600 W
Software
Slicing software: ideaMaker
Supported file types: STL, OBJ, 3MF, 3MF
Supported operating system: WINDOWS/ IOS/ LINUX
Machine code type: GCODE
