The Raise3D Pro2 Plus 3D printer

The Raise3D Pro2 Plus belongs to the new generation of printers from the manufacturer Raise. The device has already won awards. It is a competitive, advanced model with a scalable working chamber.

Read the full review Raise3D Pro2 Plus on the Top3dshop blog



  • Highest accuracy;
  • Reliability;
  • Sturdy aluminum frame;
  • Industrial components;
  • Two metal extruders (300g);
  • Unique positioning accuracy;
  • State-of-the-art motion controller;
  • Interchangeable nozzles;
  • 256 microstep drive system;
  • Aluminum heated platform with magnetic holders;
  • Auto print recovery;
  • Tracking camera;
  • Cliff sensor;
  • HEPA filter;
  • Safe for the environment;
  • Touch screen (7 inches).

The 3D printer has an enclosed housing and is enclosed in a sturdy and stable aluminum frame. The build area is 305*305*605 mm when working with one extruder, 280*305*605 mm when working with two extruders.

With the 3D Raise3D Pro2 Plus you can print projects which are difficult to build, including parts made of several completely different materials. And the print speed is much faster than previous models.

The extruders are made of metal and have a heating capacity of up to 300 degrees, which makes it possible to print a variety of materials, even such as fiberglass, nylon, carbon-filled plastics, metal-filled, wood-filled, etc.

All components industrial grade. Actuator with autonomous operation. Built-in motion controller based on 400 MHz ARMCortex-M7 32-bit RISC FPU.

The printed aluminum heated platform is supplemented with magnetic holders that allow easy removal of the finished part from the surface of the printing table. During printing, the heat is distributed evenly across the platform.
The printer is equipped with a HEPA filter, which perfectly filters the air in the chamber and removes from the air up to 91% of small particles. Thanks to this feature, the 3D printer can even be installed in the home and is completely environmentally friendly and safe for humans.

The model is equipped with a 7-inch touch screen to control it. The interface is visually clear and easy to operate, and the color settings can be set through it. A material break sensor will always alert you in case of an emergency. After stopping, the printer starts printing from the same point.
To monitor the process, the printer has a USB camera, so you can see the construction in real time via your local network or Wi-Fi.
The printer can be used for professional printing in medium and small businesses.

Examples of products:

Like this post? Please share to your friends: